FIBARO Flood Sensor is a universal, Z-Wave Plus compatible, ﬂood and temperature sensor. Device can be battery or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact. The device has built in temperature sensor, monitoring temperature of e.g. ﬂoor. FIBARO Flood Sensor is designed to be placed on the ﬂoor or on a wall with a ﬂood sensors probe extended by connected wire. The device has built in LED and sound alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when the Sensor has been taken by someone from it’s original location. LED diode signals ﬂood, operating mode or the Z-Wave network communication range. FIBARO Flood Sensor is sink resistant, drifts on the water surface and keeps on sending alarm signal in case of substantial inundation.